Touch Panel - Panasonic KX-UT670 Operating Instructions Manual

Setting
Screen timeout

Touch panel

Setting
Cleaning mode
Security
Screen unlock pattern
Setting
Set up screen
lock/Change
screen lock
*1
Use visible pattern
*1 If screen lock settings have been configured previously, [Change screen lock] will be displayed. Tapping [Change screen lock]
displays the unlock screen, where you must enter the unlock pattern, PIN, or password to proceed.
This setting is available only if an unlock pattern is specified.
*2
Passwords
Setting
Visible passwords
Document Version 2012-12
Sets the amount of time before the
screen backlight automatically turns
off.
Enables cleaning mode.
Disable the unlock setting for the
None
screen lock.
Register the unlock pattern for the
Pattern
screen lock. Connect 4 to 9 points.
Register a numeric PIN for the
PIN
screen lock.
Register a password for the screen
Password
lock.
Sets whether a trail of the input points
is displayed when entering the
*2
unlock pattern.
Sets whether entered password
letters are momentarily displayed
after they are input.
Description
Description
Description
Description
Configuration
Value Range Default
1 minute
5 minutes
10 minutes
30 minutes
60 minutes 1 minute
120 minutes
180 minutes
300 minutes
Always On
Value Range Default
—
Value Range Default
—
—
4 to 16 digits
4 to 16
alpha-numeric
characters
On/Off
Value Range Default
On/Off
Operating Instructions
—
—
—
—
—
On
On
119