Receiving Calls; Selecting From Multiple Incoming Calls; Answering A Call While On A Call (Answering Call Waiting); Rejecting Calls - Panasonic KX-UT670 Operating Instructions Manual

Receiving Calls

1.
Go off-hook.
2.
To end the call, go on-hook.
Note
•
Enabling Automatic Answer allows you to
answer an incoming call without going off-hook
(Page 92).
•
If a network camera is registered in the caller's
contact information, Network Camera Viewer
will start, and you can view the video feed from
the camera.
•
When you receive a call while using another
application, the [Incoming Call] window is
displayed.
Selecting from Multiple
Incoming Calls
When you have incoming calls from multiple parties at
the same time, you can select which one to answer.
1.
On the [Incoming] tab, select the call you want to
answer.
2.
Tap [Answer].
Note
•
The number of incoming calls is displayed on
the [Incoming] tab.
•
In the [Incoming] tab, incoming calls are
displayed from the top in the order of oldest to
newest.
Answering a Call While on a Call
(Answering Call Waiting)
When you receive a second call while on another call,
you can answer the second call after either putting the
current call on hold or disconnecting it.
Document Version 2012-12
Disconnecting the Current Call and
Answering the Second Call
1.
When you hear the call waiting tone, go on-hook.
2.
Go off-hook.
Holding the Current Call and
Answering the Second Call
1.
On the [Incoming Call] window, tap [Close].
2.
On the [Current] tab, tap [Hold].
3.
Tap the DN button (flexible button) of the incoming
call (flashing green rapidly).
Note
•
If automatic call hold is enabled through
configuration file programming, simply tapping
[Answer] on the [Incoming Call] window will
put the current call on hold and answer the
second call. For details, contact your
administrator or dealer.

Rejecting Calls

You can reject an incoming call at your unit or set the
unit to reject certain calls.
Note
•
If the unit is connected to a Panasonic
KX-NS1000 PBX, you cannot reject an
incoming call.
Rejecting a Call While Receiving
1.
When receiving an incoming call, tap
Rejecting Anonymous Calls
You can set the unit to reject calls when the unit
receives a call without phone number.
To reject anonymous calls, the Block Anonymous Call
setting must be enabled through Web user interface
programming (Page 100). For details, consult your
administrator or dealer.
Note
•
Rejected phone numbers will not be stored in
the incoming call log.
•
Depending on the line an incoming call is
arriving on, the call may not be rejected.
Phone
.
Operating Instructions 53