Receiving Alarms From Network Cameras; Configuring An Alarm Notification - Panasonic KX-UT670 Operating Instructions Manual

Receiving Alarms from
Network Cameras
When an alarm from a network camera (movement
detection, error, abnormality, etc.) is detected, this unit
can display the video feed from the camera that issued
the alarm.
Configuring an Alarm
Notification
1.
On the Home screen, press
2.
Tap [Settings].
3.
Tap [Network Camera].
4.
Tap [Alarm notification].
5.
Select a notification method:
Pop up live screen
A notification alarm will sound, and the video
feed from the camera that issued the alarm will
be displayed.
Pop up live screen or status bar notification
A notification alarm will sound, and then one of
the following will occur:
a.
If you are viewing a video feed from any
camera, the camera name +
displayed in the status bar.
b.
Otherwise, the video feed from the camera
that issued the alarm will be displayed.
Status bar notification
A notification alarm will sound, the camera
name + will be displayed in the status bar.
6.
Tap [OK].
Note
•
To prevent the Network Camera Viewer from
switching too frequently between video feeds
when several alarms are issued in a short time
span, an alarm disarm time is set (default: 2
seconds). For details about the alarm disarm
time, see page 126.
•
The video feed that is displayed when an alarm
is detected is the current video feed, not the
feed from the time the alarm was issued.
•
The video feed displayed in Network Camera
Viewer when an alarm is issued does not
automatically close, even after some time has
passed.
Document Version 2012-12
•
If you are viewing the video feed from a camera
when it issues an alarm, only a notification
alarm will sound.
•
Notifications on the Notification screen are
displayed in order, newest first. New
notifications from a network camera overwrite
previous notifications from that camera, so only
the most recent notification from any given
camera is displayed.
•
If an error occurs regarding the alarm port
number, such as a port number conflict,
displayed in the status bar. For details about the
alarm port setting, see page 126.
.
Disabling an Alarm Notification
1.
On the Home screen, press
2.
Tap [Settings].
3.
Tap [Network Camera].
4.
Tap [Alarm notification].
5.
Select [Off].
6.
Tap [OK].
will be
Network Camera
is
.
Operating Instructions 71