I-Series Indoor Gas Fireplace
Firestones or Fireglass Installation
If your fireplace has already been in operation, disconnect the gas
and electrical supply, remove the door and safety barrier.
1). Open your 6lbs of glass media purchased from your Montigo
Dealer.
Figure 1 Sec.9
2). Do not drop any glass media into the pilot. To help reduce this
when installing the glass media, place a piece of tape over the
pilot opening. Remove tape when media installation is complete
and before operating the unit.
Figure 2 Sec.9
Page 34
Installation
Figure 3 Sec.9
3). Evenly distribute the glass media around the burner tray. Make
sure there is only one layer of glass media covering the burner ports.
Figure 4 Sec.9
4). If you have used tape to cover the pilot opening, remove it now.
Figure 5 Sec.9
Figure 6 Sec.9 Completed firestone installation
XG0513-092314