Table of Contents
Advertisement
Section 9: Installing the Accessories
Installing the Firestones or optional
Fireglass
The unit is supplied with firestones. Optional fireglass may be purchased
from the dealer. Remove the Door as shown in the previous Instruction.
Once the glass door is removed place the firestones randomly across
the pan and the burners as described in Figure 11.d to 11.e
Note: Only cover the burner with one layer of firestones or fireglass.
Figure 11.d spreading out firestones
Figure 11.e Completed firestone installation
XG0225 - 170223
Installing Optional Speckled Stones
R520, R820
Once the glass door has been removed as shown in the previous section,
place the speckled stones evenly across the pan and burner. Ensure
stones do not overlap too much as this will effect the flame pattern,
see figure 11.f DO NOT cover the pilot with stones.
Figure 11.f Completed Speckled Stone installation
Installing Optional River Rocks
The R Series has the option of installing the cultured rocks which mimic
real stone. These may be spaced at random, or in a visual pattern of
your preference. See the Montigo web site for photographs and ideas.
WARNING
This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any
additional or alternative media, rock wool or other material in
this appliance. The use of additional or alternative materials
may pose potential safety hazards, damage to the appliance,
and void manufacturer's warranty.
Installation
25
Advertisement
Table of Contents
