Settings on the control panel
11.3
Basic operations for Administrator Management
11.3.1
Displaying the Administrator Management screen
1
Press the [Utility/Counter] key.
2
Touch [Admin.].
3
Type in the password, and then touch [OK].
–
For details on setting or changing the password, refer to the User's Guide [Copy Operations].
The Administrator Management screen appears.
Note
To quit specifying the Utility mode settings, press the [Reset] key. Otherwise, exit the Utility mode by
touching [OK] in each screen until the screen for the Copy or Fax/Scan mode appears.
C200
11
11-18