11
SERVICE WORK ON THE CHASSIS
11.41
Adjusting the chain guide
11.42
Checking the frame
11.43
Checking the swingarm
11.44
Checking the routing of the throttle cable
x
–
Unscrew screw
Condition
Number of teeth: ≤ 44 teeth
–
Insert collar bushing
–
Mount and tighten screw
Guideline
Remaining screws, chassis
Condition
Number of teeth: ≥ 45 teeth
–
Insert collar bushing
–
Mount and tighten screw
Guideline
Remaining screws, chassis
101693-10
x
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
800206-10
x
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
500285-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
. Remove screw
. Swing the chain guide down.
1
2
into drill hole
3
. Tighten screw
2
into drill hole
3
. Tighten screw
2
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 49)
(
p. 53)
x
. Position the chain guide.
A
.
1
M6
10 Nm
(7.4 lbf ft)
. Position the chain guide.
B
.
1
M6
10 Nm
(7.4 lbf ft)
59