15
COOLING SYSTEM
15.8
Refilling with coolant
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and con-
tact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immedi-
ately. Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
Condition
The engine is cold.
–
Position the motorcycle upright.
–
Place a suitable container under the water pump cover.
(All 125/150 models)
–
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Drain plug, water pump cover
101746-10
(All 250/300 models)
–
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Drain plug, water pump cover
101747-10
x
(All 125/150 models)
–
Make sure that screw
B00071-10
(All 250/300 models)
–
Make sure that screw
B00072-10
. Take off radiator cap
1
2
with a new seal ring.
1
M10x1
. Take off radiator cap
1
2
with a new seal ring.
1
M10x1
is tightened.
1
is tightened.
1
.
15 Nm
(11.1 lbf ft)
.
15 Nm
(11.1 lbf ft)
83