Service Work On The Chassis; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 125 SX EU Owner's Manual

11

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with the lift stand

11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.3

Bleeding the fork legs

(All 125/150 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
101670-01
–
Secure the motorcycle against falling over.
(All 250/300 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
101671-01
–
Secure the motorcycle against falling over.
(All SX models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
spindle.
101668-10
(All XC models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
lean the motorcycle on it.
800211-10
Preparatory work
–
Raise the motorcycle with the lift stand. (
Info
Remove the plug-in stand before riding.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
into the left side of the wheel
1
to the ground with your foot and
1
p. 40)
40