Scanning To A Computer (Wsd) - Epson All in One Printer User Manual

User's Guide
B
Enter Scan mode from the Home menu.
C
Select Document Capture Pro.
D
Press the Select Computer field, and then select the computer to which a job has been registered in Document
Capture Pro.
Note:
If you have set a password in Document Capture Pro from the Network Scan Settings in the software, select a
computer and then enter the password.
E
Select a job.
Note:
❏ When you have registered only one job in advance, go to step 6.
❏ To check the job details, press the job contents field on the screen.
❏ To select another registered job, press the job select field again.
F
Press one of the x buttons.
The scanned image is saved to the destination you specified.

Scanning to a computer (WSD)

Note:
❏ This function is only available for computers running Windows 8, Windows 7, or Vista.
❏ To use this function, you need to setup WSD for your computer in advance. For more information, see the online
Network Guide.
A
Place original.
"Placing Originals" on page 33
&
B
Enter Scan mode from the Home menu.
C
Select Computer (WSD).
D
Select a computer.
E
Press one of the x buttons and then start scanning. Your scanned image is saved.
Note:
Depending on the version of the operating system, the scanned image is saved to different destinations. For more
information, see your computer's documentation.
Scanning
62