Epson All in One Printer User Manual page 150

User's Guide
Code Problem
102 Collate printing has failed due to a lack of
available memory.
103 Printing quality has been lowered due to a lack of
available memory.
104 Reverse printing has failed due to a lack of
available memory.
106 Cannot print from the computer due to the
access control settings.
107 User authentication failed. The job has been
canceled.
108 Confidential job data was deleted when the
product was turned off.
109 The received fax was already deleted.
110 The job was printed on one side only because the
paper loaded does not support double sided
printing.
111 Short of available memory.
201 The memory is full.
202 The line was disconnected by the recipient
machine.
203 The product cannot detect the dial tone.
204 The recipient machine is busy.
205 The recipient machine does not answer.
206 The phone cable is incorrectly connected to the
LINE and EXT port of the product.
207 The product is not connected to the phone line.
208 The fax could not be sent to some of the specified
recipients.
Error Indicators
Solution
Clear downloaded fonts from Clear Internal Memory Data or
reduce the size of the print job.
If you do not want to reduce the size of the print job, print one
copy at a time.
If the quality of the printout is not acceptable, try simplifying the
page by reducing the number of graphics or the number and size
of the fonts.
Clear Font data.
"System Administration Settings" on page 102
&
Reduce the data size of the print job.
Contact your printer administrator.
Contact your printer administrator.
-
-
-
Reduce the size of the print job.
"Memory full error occurs" on page 179
&
Wait for a moment, and then try again.
Check the phone line is connected correctly.
"Connecting to a Phone Line" on page 74
&
Find more solutions in the following section.
""No dial tone detected." error occurs" on page 178
&
Wait for a moment, and then try again.
Connect the product to the phone line correctly.
"Connecting to a Phone Line" on page 74
&
Print a Fax Log from Fax Report to check which recipients failed
to receive the fax.
"Printing a fax report" on page 93
&
When Save Failure Data is set to On, you can resend a fax from Job
Monitor in Status Menu.
150