Horizontal Banding; Vertical Banding Or Misalignment - Epson All in One Printer User Manual

User's Guide
"Horizontal banding" on page 163
&
"Incorrect or missing colors" on page 164
&

Horizontal banding

❏ Make sure the printable side (the whiter or glossier side) of the paper is face up in the rear paper feed.
❏ Make sure the printable side (the whiter or glossier side) of the paper is face down in the paper cassette.
❏ Run the Nozzle Check utility and then clean any print heads which produced a defective nozzle check result.
"Checking the Print Head Nozzles" on page 126
&
If the problem does not improve, run the Print Head Alignment utility.
"Aligning the Print Head" on page 130
&
❏ For best results, use up ink cartridge within six months of opening the package.
❏ Try to use genuine Epson ink cartridges.
❏ Make sure the paper type selected in the LCD menu or printer driver is appropriate for the type of paper loaded in
the product.
"Selecting Paper" on page 24
&
❏ If a moire (cross-hatch) pattern appears on your copy, change the Zoom setting in the LCD menu or shift the
position of your original.
❏ If there is problem with copy quality, clean the surface of the scanner glass.
"Cleaning the exterior of the product" on page 133
&

Vertical banding or misalignment

❏ Make sure the printable side (the whiter or glossier side) of the paper is face up in the rear paper feed.
❏ Make sure the printable side (the whiter or glossier side) of the paper is face down in the paper cassette.
Troubleshooting for Printing/Copying
"Vertical banding or misalignment" on
&
"Blurry or smeared print" on page 164
&
163
page 163