Removing A Slot Adapter; Installing And Removing Drives - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

System expansions

Removing a slot adapter

► Unscrew the screw (1) and remove the slot adapter (2).
Low-profile boards,

Installing and removing drives

Drive 51/4-inchdrive 31/2-inchdrive Drive Drive Drive Drive
The casing can accommodate a total of seven drives:
• four accessible drives (two 5¼-inch drives and two 3½-inch drives)
Depending on the device expansion stage:
• two non-accessible drives (two 3½-inch drives with half installation height)
or
• four non-accessible drives (four 3½-inch drives with half installation height)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be
inserted from outside. Non-accessible drives are e.g. hard disk drives.
The number of screws used to attach the drives varies according to the type of drive
fitted and may not necessarily match the depiction below.
52
2
1
A26361-K1182-Z120-1-7619, edition 3