Table of Contents
Advertisement
Getting started
Getting started
Gettingstarted
Please observe the safety information in the
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
Packaging,
Contentsofdelivery
Packaging
Ask somebody else to help you lift and carry the device.
The device should only be unpacked at the location where it is to be used.
► Unpack all the individual parts.
► Check the contents of the package for any visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► If the delivery does not correspond to the delivery note or if any part of the
delivery is damaged, please notify your local sales outlet immediately - refer to
"Troubleshooting and tips", Page 30
Steps for initial setup
Preparingforfirstuse,overview
Preparingforuse,
Only a few steps are necessary to put your new device into operation for the first time:
•
Select a location for device and set up device
•
Connecting external devices
•
Check the voltage at the mains outlet and connect the device to an electrical outlet
•
Switch the device on
You will learn more about the individual steps in the following sections.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the
"System expansions", Page 35
8
"Important notes", Page 4
for more information.
chapter.
A26361-K1182-Z120-1-7619, edition 3
chapter.
Advertisement
Table of Contents
