AFTER THE FIRST 50 HOURS
1. Check coolant, engine oil, and hydraulic oil level and
for leaks every day. Refill with the recommended oils
and coolant.
2. Check and grease the greasing points at the regular
intervals. Grease the front attachment pins every day.
3. Retighten bolts at the regular intervals.
4. Re-drive in the tooth (point) holding wedges.
5. Check the monitor for any abnormality while operat-
ing the machine.
6. Operate the machine after thoroughly warming up the
engine and hydraulic oil.
7. Check the machine for any abnormal operations while
operating the machine.
BREAK-IN
2-2