Hitachi EX 3600-6 Operator's Manual page 167

Backhoe Front Joint Pins --- daily
Add grease to all fittings shown below every 10 hours or
each shift before starting. Most of the fittings are grouped,
as shown, for quick and safe lubrication.
NOTE: Auto-lubrication can be used for the fittings on
the backhoe front except for the bucket and link.
1. Park the machine on a level surface.
2. Lower the bucket to the ground.
3. Pull the pilot control shut-off lever to the LOCK
position.
4. Apply grease to fittings until grease can be seen
escaping from greasing places.
5. Take care not to supply excessive grease.
Manually greasing places are as illustrated below.
1. Grouped Grease Fittings (1) --- Bucket
MAINTENANCE
: Lubrication points
7-28
1
M18M-07-030
1
M18M-07-032
1
1
M18M-07-031