Hitachi EX 3600-6 Operator's Manual page 85

Seat/Backrest Fore-Aft Adjustment
Pull lever (5) up to adjust the seat/backrest fore-aft posi-
tion. The adjusting positions are provided in 12 places in
10 mm increments.
Seat Height Adjustment
IMPORTANT: The seat is supported by the air suspen-
sion system. Turn the key switch ON to
supply air from the compressor.
Pull lever (3) once and release it. The seat height should
automatically adjust corresponding to your weight. When
further adjustment is required, pull lever (3) continuously
to raise the seat height further. When lever (3) is pushed
downward, the seat height is lowered.
Seat/Armrest/Backrest Fore-Aft Adjustment
Pull lever (4) to adjust the fore-aft position of the seat,
armrest, and backrest as a unit. The adjusting positions
are provided in 15 places in 10 mm increments.
OPERATOR'S STATION
1-42
5 3
4
M18G-01-054