Pilot Control Shut-Off Lever - Hitachi EX 3600-6 Operator's Manual

PILOT CONTROL SHUT-OFF LEVER

Pilot control shut-off lever (1) functions to prevent
misoperation of the machine from occurring if the control
levers are accidentally moved when leaving the operator's
seat or when entering the cab.
WARNING:
•
Always pull pilot control shut-off lever (1) into
the full LOCK position. The pilot control
shut-off function will not be activated
otherwise.
•
When leaving the machine:
• Stop the engine.
• Then, pull the pilot control shut-off lever up to
the LOCK position.
•
Always check to be sure that the pilot control
lever is pulled up to the LOCK position before:
• Transporting the machine.
• Leaving the machine at the end of the shift.
Pilot Control Shut-Off Lever Operation
Before Leaving the Machine:
1. Park the machine on a firm, level surface. Lower the
bucket to the ground. Return all control levers to neu-
tral. Properly shut down the engine.
2. Pull pilot control shut-off lever (1) up into the full
LOCK position.
Before Starting Operation:
1. Confirm that pilot control shut-off lever (1) is pulled up
to the LOCK position.
After starting the engine:
1. Confirm that all control levers and pedals are in
neutral and that no part of the machine is in motion.
2. Lower pilot control shut-off lever (1) to the UNLOCK
position.
If any part of the machine (any actuator) moves when the
pilot control shut-off lever is lowered to the UNLOCK
position despite the fact that all controls are placed in
neutral, the machine is malfunctioning. Immediately pull
the pilot control shut-off lever back to the LOCK position,
and stop the engine. Then, see your authorized dealer.
OPERATING THE MACHINE
5-6
1
LOCK Position
1
UNLOCK Position
M18M-01-018
M18M-05-001