Hitachi EX 3600-6 Operator's Manual page 180

8. Prepare a container of 280 liter (74 US gal) or more
capacity for the drain oil.
9. Remove drain plug (6).
10. Open drain cock (7) and (8) to drain the engine oil.
11. Check if foreign material like metal particles are
included in the drain oil by filtering it with a clean
cloth.
12. Tighten drain plug (6) and close drain cock (7) and (8)
securely.
13. Remove dipstick (9) and put the quantity of oil you
need.
14. Confirm that oil level is above the line of premium or
standard in accordance with the oil you use on
dipstick (9).
NOTE: Checking the oil level immediately after shut
down will result in inaccurate readings. Be sure
to allow the oil to settle for at least 10 minutes
before checking.
NOTE: Oil can be refilled from the ground using the
Fast-Filling panel located in the rear of the base
machine. Refer to page 1-38 for Fast-Filling
panel operation. If refilling the reserve tank up
with oil, automatic fill system is available. See
"How to operate automatic fill system" next
page.
MAINTENANCE
Reserve Tank
7-41
9
7
Reserve Tank
Oil Pan
Clean Cloth
Container
M18M-07-077
8 6
M18M-07-082
M104-07-010