Ac Operation - Hyundai HY300SEI User Manual

trical rating of the device does not exceed the electrical rating
of the generator.
•
Be sure the device is turned off before plugging in the power
cord.
• When the output indicator light (green) is OFF, and the overload
indicator light (red) is ON, flip the engine switch to the STOP
position, stop the engine at once and then start the engine again.
NOTICE
When a connected device draws high startup power the overload and
output indicator light may briefly illuminate, but this is to be expected.
Once the device starts up the overload indicator light will shut off and
the output light will remain green.
GROUND TERMINAL
Before using the generator, a ground wire must be connected to the
•
ground terminal.
Before using the ground terminal consult a qualified electrician. (Refer
•
to Fig.)
FOR AC OPERATION
1. Ensure all devices are OFF before connecting to the generator.
2. Start the generator and make sure that the green output indicator light
turns on. (Refer to Fig.)
3. Plug the power cord of the device into the AC socket, turn on the
circuit protector, and turn on the device. (Refer to Fig.)
HY3000sei User Manual
13