Component Diagram - Honda TRX350TM Rancher Service Manual

COMPONENT DIAGRAM

GEARSHIFT COMBINATION
SWITCH METER
IGNITION
SWITCH
BATTERY
Shift Position Indicator
The shift position indicator incorporated in the combination meter indicates the current shift position, as it receives the signal
from the gear position switch.
Gearshift Switch
When the operator presses the gearshift switch installed on the left handlebar, it sends the shift-up or shift-down signal to
Electronic Control Unit.
Reverse Shift Switch
The reverse shift switch, located on the rear crankcase cover, turns ON when the reverse selector is operated.
The Electronic Control Unit will shift to Reverse and the control motor starts to run.
While the reverse selector is being operated.
Electronic Control Unit
The Electronic Control Unit, installed inside the right rear fender, controls the system by processing the signals coming from
each switch and sensor.
Ignition Pulse Generator
The pulse generator, installed inside the rear crankcase cover, controls the ignition system and also sends an engine
revolution signal to the Electronic Control Unit.
Control Motor
The control motor, installed on the front crankcase cover, rotates the sub-gearshift spindle depending on the current from
the Electronic Control Unit.
CONTROL MOTOR
ANGLE SENSOR
CLUTCH
TECHNICAL FEATURES
IGNITION PULSE GENERATOR
SHIFT DRUM
TRANSMISSION
SPEED SENSOR
REVERSE
SHIFT
SWITCH
GEAR
POSITION
SWITCH
23-7