Headlight Bulb Replacement; Taillight Replacement - Honda TRX350TM Rancher Service Manual

LIGHTS/METERS/SWITCHES
BULB REPLACEMENT
HEADLIGHT
T M/ T E models:
Remove the screw and the cover cap by releasing
the tabs from the slits in the headlight cover.
Remove the dust cover from the headlight.
While pushing the bulb socket in, turn it counter-
clockwise to remove it.
Align the bulb tab
Remove the bulb from the headlight and replace it
with the headlight with a new one.
groove.
Install the dust
Install the removed parts in the reverse order of
cover tightly removal.
against the
headlight with the
''T OP'' mark
f acing up.
F M/ F E models: Remove the screw and the cover cap by releasing
the tabs from the slits in the headlight cover.
Remove the bulb socket by turning it counterclock-
wise.
Disconnect the bulb connector and replace the bulb
with a new one.
Make sure that the seal rubber on the connector is
installed in position and is in good condition.
Align the socket Install the bulb in the reverse order of removal.
tabs with the
headlight grooves
properly.
TAILLIGHT
Open the tool box cover.
Release the taillight wire from the wire guides.
Remove the taillight unit from the box cover by
pushing the mounting studs off the grommets.
20-2
SCREW
TAB
CAP
DUST COVER
SOCKET
SCREW
TAB
CAP
BULB
CONNECTOR
STUDS
WIRE
COVER
SLIT
BULB
SLIT