Configuration Menu - Sony HKCU1001 Installation Manual

3-4. Configuration Menu

Page Menu / Menu Image
C00 COLOR BAR
<COLOR BAR> ?C00 TOP
HD-BAR ENABLE:SSM-OUT
SEL MF-SMPTE(100%.Q)
MF-CB : MODIFY
SLOPE : WIDE
SD-BAR : SMPTE
BAR-CHARA:OFF
GRAY: ON
: The settings in the box are default values.
3-10 (E)
Item
HD-BAR
ENABLE
: ENB
SEL
MF-CB
SLOPE
SD-BAR
BAR-CHARA
GRAY
Setting
Description
Sets the color bar for the HD output.
Selects the slot to which the color bar is
output.
SSM-OUT SSM-OUT : SS-A/B/C and SLOT2 to 3.
SLOT1-3 SLOT1-3 : SLOT1 to 3.
SLOT2-3 SLOT2-3 : SLOT2 to 3.
ALL (VF) ALL (VF) : SS-A/B/C and SLOT1 to 3.
HD-BARS FORMAT (*4) Sets the type of color bar signal.
MODIFY /EVEN
Selects MF-CB width.
WIDE /NARROW
Sets the slope (width) of the color bar
signal.
SD-BARS FORMAT (*5) Sets the color bar for the SD output.
ENB /DSB ENB :
DSB :
OFF /ON Turns ON/OFF the BARS CHARAC-
TERS function that superimposes
characters on the color bar signal.
OFF/ ON Turns ON/OFF the GRAY function.
ON : Outputs a gray screen when there
OFF : Outputs the CB signal.
(*4) HD-BARS FORMAT BAR 16:9 (100%)
BAR 16:9 (75%)
SMPTE 16:9 (BLACK)
SMPTE 16:9 (_I/Q)
BAR 4:3 (100%)
BAR 4:3 (75%)
SMPTE 4:3 (BLACK)
SMPTE 4:3 (_I/Q)
MF-ARIB (75%)
MF-ARIB (100%)
MF-ARIB (+I)
MF-SMPTE (_I, Q)
MF-SMPTE (75%, Q)
MF-SMPTE (100%, Q)
MF-SMPTE (+I, Q)
HD-CUSTOM
SDI CHECK FIELD
Y -RAMP
Y/C-RAMP
HD-CUSTOM2
(*5) SD-BARS FORMAT SMPTE
EIA
FULL
95%
NTSC100%
Y/C-RAMP
Y -RAMP
Outputs CB for SD.
Changes HD-CB to SD signal and
outputs it.
is a signal error, or when the
power to the camera is off.
HDCU3300/IM (J,E)