Sony HKCU1001 Installation Manual page 68

Page Menu / Menu Image
C06 INCOM/PGM
<INCOM/PGM>
FP-INCOM
(MIC ON) (PRIVATE)
PGM-MODE : OFF
PGM-SEL : MIX
PGM1 : 0
PGM2 : 0
SIDE TONE: 0
INCOM-CH : 2CH
C07 PROMPT/TRUNK
<PROMPT/TRUNK> ?C07 TOP
PROMPTER: 2CH
TRUNK SETTING
CH : 2CH
IF : 232C
C08 VIDEO SETUP
<VIDEO SETUP> ?C08 TOP
SETUP : OFF
Q FILTER : WD
G/Y SYNC : OFF
VCS RELAY : ON
*1
09 VIDEO ADJUST
(When using EN-159 board)
<VIDEO ADJUST>
VBS LEVEL :
CHROMA:
PIX LEVEL :
CHROMA:
WFM LEVEL :
CHROMA:
: The settings in the box are default values.
*1 : VIDEO ADJUST menu appears when the EN-159 board is installed.
3-14 (E)
Item
FP-INCOM
C06 TOP
PGM-MODE
PGM-SEL
PGM1
PGM2
SIDE TONE
INCOM-CH
PROMPTER
TRUNK SETTING
CH
IF
SETUP
Q FILTER
G/Y SYNC
VCS RELAY
VBS
LEVEL
C09 TOP
CHROMA
0
0
PIX
0
0
LEVEL
0
0
CHROMA
WFM
LEVEL
CHROMA
Setting Description
(MIC ON/OFF/PGM ON) Displays the FRONT INCOM MIC SW
settings.
(PROD/ENG/PRIVATE) Displays the FRONT INCOM line
settings.
SEP/MIX/ OFF Sets the PGM-MODE output.
MIX/ PGM1 /PGM2/OFF Selects the PGM-MODE.
_99 to 0 to +99 Sets PGM1 level.
_99 to 0 to +99 Sets PGM2 level.
_99 to 0 to +99 Sets SIDE TONE level.
1CH/ 2CH Selects INCOME CHANNEL.
1CH/ 2CH Sets line number for Prompter.
Sets line for TRUNK.
1CH/ 2CH Sets the channel number used.
232C /422A Sets the communication line mode.
OFF /ON Turns ON/OFF the SETUP.
WD /NA Sets width of Q-Filter. (Only when the
EN board is attached)
OFF/ ON Turns ON/OFF Gch-SYNC for the R/G/B
component signal.
(Only when the EN board is attached)
OFF/ ON Sets PIX/WFM terminal output mode.
(Only when the EN board is attached)
Adjusts the VBS output video level.
_99 to 0 to +99
_99 to 0 to +99
Adjusts the PIX output video level.
_99 to 0 to +99
_99 to 0 to +99
Adjusts the WFM output video level
_99 to 0 to +99
_99 to 0 to +99
HDCU3300/IM (J,E)