Sony HKCU1001 Installation Manual page 59

Page Menu / Menu Image
18 Slot 3 Board Diag
*EN-A (Slot3)Diag* 15/18
Front Power:OK
PLD Version:1.00 Done
Mode :Normal
Rear:VDA-A Power:OK
19 SDP/OTR Board Diag
*SDP/OTR Diag*
SDP-PLD Status
RX-PLD Version:1.00
TX-PLD Version:1.00
Config Done :Done
OTR-PLD Status
PLD Version :1.00
Config Done :Done
SDP Mode :Normal
SDP Power :OK
20 Camera Diag
*CAMERA Diag*
ALL BOARD OK
21 ROM Version
*ROM Version*
CAM HDC3300
1.01 06.07.26
CCU HDCU3300
1.01 06.07.25
R-PNL CNU-700
3.40 06.07.15
HDCU3300/IM (J,E)
Item
Front Power
PLD Version
Mode
Rear
Power
PLD Version
16/18
Mode
Power
(Camera Board
17/18
Diag Display)
CAM Version
18/18
CCU Version
R-PNL Version
Description
Displays the status of the option board attached to the Slot 3
(front/rear).
The display content varies depending on the board installed in
the optional slot.
Displays the PLD Version and the status of the SDP/OTR board.
Displays the results of the automatic diagnostics for each board
of the camera.
"ALL BOARD OK" is displayed if there are no abnormalities in
the automatic diagnostics.
ROM version information for the connected camera.
ROM version information for AT-167S board in the main unit.
Information about the equipment connected to the rear panel
port (RCP/CNU).
3-5 (E)