Sony HKCU1001 Installation Manual page 17

Ref.No. Name
S405 V-DLY
S406 MODE1
1 MIC-GT 1&2/1,2
2 MIC-G7 STD/700
3 D-SUB MIC/WFM Does not function
4 ASPECT RMT/PNL ON: Accepts the switching command last input from MSU when the ASPECT
5
6 CNU/RM
7 RCP-PX ENB/DIS Sets the monitor selection control method for PIX OUT by RCP.
8 MONI-S M&R/RCP
HDCU3300/IM (J,E)
Function
Video phase setting between HD and SD
Sets the phase difference (delay time) between the HD signal and the SD
signal output from CCU.
The phase can be advanced as follows based on the delay time set with S410.
HD standard: 128ck (27 MHz) increment
SD standard: 256ck (74 MHz) increment
S407 REFERENCE HD
Reference (advance amount
of SD)
0 0
1 _4.74 usec
2 _9.48 usec
3 _14.2 usec
4 _19.0 usec
5 _23.7 usec
_28.4 usec
6
7 _33.2 usec
_37.9 usec
8
_42.7 usec
9
_47.7 usec
A
B _52.1 usec
C _56.9 usec
D _61.6 usec
E _66.3 usec
F _71.1 usec
1H 525 : 63.5 usec 1125-60i : 29.6 usec
625 : 64.0 usec 1125-50i : 35.6 usec
1125-24 PsF : 37.0 usec
Sets whether controlling MIC1 and MIC2 independently or by interlocking them.
ON: MIC1, MIC2 independent control
OFF: MIC1, MIC2 interlocked control
For switching the interface specification of MIC-Remote (D-SUB-15P)
ON: Old interface (700 mode)
OFF: Standard-I/F
switching from outside (D-Sub) is valid.
OFF: Does not accept the command input from MSU when the ASPECT
switching from outside (D-Sub) is valid.
Not used
Does not function
ON : Only WF can be controlled from RCP.
OFF : Both PIX and WF can be controlled from RCP.
Sets the monitor selection control method for PIX/WF OUT.
ON : Can only be controlled from RCP.
OFF : Can be controlled from either MSU or RCP. (Latest priority)
REFERENCE SD
Reference (advance amount
of HD)
0
_3.45 usec
_6.70 usec
_10.3 usec
_13.8 usec
_17.2 usec
_20.7 usec
_24.1 usec
_27.6 usec
_31.0 usec
_34.5 usec
_37.9 usec
_41.4 usec
_44.8 usec
_48.3 usec
_51.7 usec
750-60P : 22.2 usec
750-50P : 26.7 usec
Factory default setting
0
OFF
OFF
OFF
OFF
OFF
1-11 (E)