Connection Connectors; Note When Connecting Camera; Connector - Sony HKCU1001 Installation Manual

1-2-3. Connection Connectors

When connecting cables to each connector of the connec-
tor panel during installation or service, connect the follow-
ing connectors or equivalent to the tip.

Connector

HDCU3300
CAMERA
(HDC3300 side)
CCU
HDCU3300
VBS (1-4)
PROMPTER (1-2)
REFERENCE
SYNC
CHARACTER
AES/EBU
HDCU3300
SS-A (1-2)
SS-B (1-2)
SS-C (1-2)
HD-SDI (1-4)
SLOT2 (1-4)
HD SDI (1-4)
SD SDI (1-4)
HKCU1001/1003
VBS (1-2)
PIX OUT
WF OUT
HKCU1003
FRAME REF IN (Not used)
FRAME REF OUT (Not used)
VBS
PIX OUT
WF OUT
R-Y/R (Not used)
Y/G (Not used)
B-Y/B (Not used)
(BNC)
HDCU3300/IM (J,E)
Connector/cable
. LEMO®
PUW. 3K. 93C. TLCC96 *1
. LEMO®
FUW. 3K. 93C. TLMC96 *1
1-564-742-11 PLUG, BNC or
B-B Cable assembly
(1.5 m, optional)
1-569-370-12 PLUG, BNC or
BELDEN8281 Cable or
equivalent
Connector
HKCU1005
SDI OUT (1-4)
MIC 1/2
(3P, Male)
WF REMOTE/MIC REMOTE 1-506-582-11 D-sub 15P, Male
I/O PORT
(D-sub 15P, Female)
INTERCOM/TALLY/PGM
(D-sub 25P, Female)
WF MODE
(4P, Female)
RCP/CNU
(8P, Female)
INCOM
(5P, Female)
TRUNK LINE
(D-sub 9P, Female)
*1 : Caution in making the optical/electric signal composite cable:
When making the optical/electric signal composite cable used for this
camera system, the connection connectors specified in this manual
must be used in order to comply with the limits for EMC regulations.

1-2-4. Note when Connecting CAMERA

Connector
Before connecting the unit to the camera adaptor, clean the
following optical contact blocks.
For the cleaning procedure, refer to Section 1-11, "Clean-
ing of Connector/Cable".
. CAMERA connector of the unit
. CCU connector of the camera side
. Optical/electric signal composite cable
Connector/cable
1-508-083-00 XLR 3P Female
or CANNON XLR-3-11C
equivalent
or JAE DA-CI-J10 equivalent
D-sub 25P, Male
JAE DA-25PF-N equivalent
1-560-155-00 PLUG, 4P Male
(supplied with HKCU1001/1003)
1-766-848-11 PLUG, 8P Male
or CCA cable assembly (optional)
CCA-5-10 (10 m), CCA-5-3 (3 m)
1-508-370-11 XLR 5P, Male
or CANNON XLR-5-12C
equivalent
1-560-651-00 D-sub 9P, Male
or JAE DE-9PF-N equivalent
1-561-749-00 JUNCTION SHELL
1-7 (E)