Table of Contents
Advertisement
2-1. Setting Menu
The setting menu is used for selecting and adjusting all of
the parameters.
Setting menu configuration
The Setting menu consists of the following menus.
. OPERATION menu
. SERVICE menu
n
The TOP menu screen is also available for displaying the
entire configuration of the menu items.
For information about how to display the TOP menu, refer
to "2-2. TOP Menu".
Description of switches
PEAKING
CONTRAST
ZEBRA
DISPLAY
ON
OFF
ASPECT
MOMENT
MENU
1 MENU
switch
1 MENU switch
1
1
1
1
Displays the setting menu.
Deletes changed parameters during setting and returns
to page selection mode or the TOP menu.
2
2 ENTER switch
2
2
2
Page, item and setting value are confirmed.
3
3 ASSIGN1 switch
3
3
3
Proceeding to next page, shifting of item and increas-
ing of setting value are performed.
4
4
4
4 ASSIGN2 switch
4
Returning to previous page, shifting of item and
decreasing of setting value are performed.
HDVF-C35W
Section 2
Setting Menu
3 ASSIGN1 switch
BRIGHT
1
TALLY
HIGHT
OFF
2
LOW
4 ASSIGN2 switch
ENTER
2 ENTER
switch
Basic operations
1. Enter the menu.
Push the MENU switch.
VF MENU
? 01 FUNCTION
ASSIGN.1
ASSIGN.2
KNEE
MONOCHROME
GRAY SCALE
CHROMA
A menu page appears in the viewfinder display.
The viewfinder menu can be displayed even while a
picture from the camera is being displayed. The
camera picture or menu darkens so that it appears
dimly behind the menu.
2. Select a menu page.
(1) While the ? mark appears to the left of the page
number (page select mode), push the ASSIGN 1
or ASSIGN 2 switch.
The menu changes to another page.
Page select mode
? mark
VF MENU
? 05 MAGNIFICATION
MAGNIFICATION :
POSITION
AUTO RELEASE :
MAG PEAKING
PEAKING LEVEL:
(2) When the desired menu page appears, push the
ENTER switch.
The → mark appears to the left of a menu item on
the selected menu page (item select mode).
m
. To select another menu page, push the MENU
switch to return to the page select mode.
. If the
mark appears to the left of a menu item and
the ? mark appears to the left of the setting (value
setting mode), push the MENU switch to return to
item select mode. Push the MENU switch again to
return to page select mode.
:
MONO
:
MAG
:
OFF
:
OFF
:
OFF
:
0
OFF
:
CNT
AUTO
:
OFF
---
2-1 (E)
Advertisement
Table of Contents
