Sony HKCU1001 Installation Manual page 63

Page Menu / Menu Image
S06 RETURN SETUP
<RETURN SETUP>
FRAME SYNCHRO : ON
SD-RETURN
MATRIX : ON
LB LINE: 364
ASPECT : MANUAL
S07 CCU VIDEO
<CCU VIDEO>
VBS-CHROMA : ON
MONO COLOR : OFF
PHASE : 158
SATURATION: 0
S08 SSM DETAIL
<SSM DETAIL>
DETAIL : ON
LEVEL [STD]: 0
RATIO[SSM]: 100%
CRISP [STD]: 0
RATIO[SSM]: 150%
S09 SSM FLICKER
<SSM FLICKER>
REDUCER : OFF
FREQUENCY : 60Hz
[R] [G] [B] [M]
GAIN : 0 0
OFFSET: 0 0
AREA SELECT:
: The settings in the box are default values.
HDCU3300/IM (J,E)
Item
FRAME SYNCHRO
S06 TOP
SD-RETURN
MATRIX
LB LINE
ASPECT
VBS-CHROMA
S07 TOP
MONO COLOR
PHASE
SATURATION
DETAIL
S08 TOP
LEVEL [STD]
RATIO [SSM]
CRISP [STD]
RATIO [SSM]
REDUCER
S09 TOP
FREQUENCY
GAIN [R]
0 0
0 0
GAIN [G]
GAIN [B]
GAIN [M]
OFFSET [R]
OFFSET [G]
OFFSET [B]
OFFSET [M]
AREA SELECT
Setting Description
OFF/ ON Turns ON/OFF the delay function for the
return signal.
OFF/ ON Turns ON/OFF the HD-Matrix to the SD
return signal.
360/ 364 Sets the number of valid lines for
LETTER BOX mode.
MANUAL /AUTO Selects the automatic linking function of
SD-Return ASPECT setting.
OFF/ ON Turns ON/OFF the CHROMA signal for
the VBS output signal.
OFF /ON Turns ON/OFF the MONO COLOR
function.
0 to 358 Adjusts the phase of MONO COLOR.
_99 to 0 to +99 Adjusts the saturation of MONO
COLOR.
OFF/ ON Turns ON/OFF the HD Detail function.
_99 to 0 to +99 Adjusts the level of HD Detail added to
the standard speed output.
0% to 100% Adjusts the ratio of HD Detail Level
added to the super slow motion output.
_99 to 0 to +99 Adjusts the level of HD Detail Crispening
added to the standard speed output.
100% to 150% to Adjusts the ratio of HD Detail Crispening
200% added to the super slow motion output.
OFF /ON Turns ON/OFF the Flicker Reducer
function.
50 Hz/ 60 Hz Selects the power supply frequency.
_99 to 0 to +99 Amount of flicker correction
R/G/B/Master
0 to +99 Adjusts the level at which the flicker
correction activates.
R/G/B/Master
Selects the area to which the flicker
correction is applied.
AUTO selects the correcting area auto.
Default : AUTO
3-9 (E)