Ps/2 Mouse And Keyboard; Pci Or Pcie Bus Expansion - Advantech PPC-L158T User Manual

3.3 PS/2 Mouse and Keyboard

1. To install a full-size desktop PS/2 keyboard and mouse with the panel PC, follow
these instructions:
2. Be sure the panel PC is turned off.
3. Attach the keyboard to the purple colored 5-pin PS/2 port.
4. Attach the PS/2 mouse to the green colored port.
5. Turn on the panel PC.

3.4 PCI or PCIe Bus Expansion

The panel PC supports either one PCI or one PCIe bus expansion card. To integrate
a new expansion bus card into the system, follow these instructions:
1. Turn off the panel PC.
2. Unscrew the screws on the top of the rear cover, and remove them.
3. Remove the metal plate by unscrewing the attaching screw.
4. Insert the PCI or PCIe into the PCIe slot of the riser card. (See Figure 3.2)
5. Run the setup program within the OS to configure the system.
Figure 3.2 PCI & PCIe Bus Expansion
13 PPC-L158T User Manual