Related Manuals for Advantech PPC Series
Summary of Contents for Advantech PPC Series
- Page 1 PPC机种调整LED背光 指导书 方法一 • 透过BIOS进系统微调 –看到开机画面时，按键盘Del键，进入BIOS，图1.1。 有关本产品和研华其他产品的更多信息，请访问我们 的网站： http://www.advantech.com 技术支持与服务，请访问： http://www.advantech.com/support/ 本安装指南适用于PPC机种调整LED背光。 Part No. 200K310030 第一版 中国印刷 2012年10月 PPC机种调整LED背光指导书 1...
- Page 2 方法一 –进入左上角“Main”选单，图1.2。 –往右选“Chipset”选单，选“Host Bridge”，再选“Intel IGD Configuration”，再选“LCD Brightness Control”， 图1.3、1.4、1.5。 2 PPC机种调整LED背光指导书...
- Page 3 方法一 PPC机种调整LED背光指导书 3...
- Page 4 方法一 –选“Manual Mode”即可选“Brightness Manual Control”，有100%、80% 、60%、40% 、20%、10%六种层级可选择， 图1.6、1.7。 4 PPC机种调整LED背光指导书...
- Page 5 方法一 –如选Dynamic Mode，系统将会启动自动侦测功能，图1.6。 –设定完后需在Save & Exit选单下按确定，即完成设定,图1.8。 PPC机种调整LED背光指导书 5...
- Page 6 方法二 • 透过软件PPC Backlight Adjustment Tool调整背光 –点选软件图标，进入选单画面，图2.1。 如果使用的是Windows XP OS, 请先安装Net framework 2.0然后再使用此 软件；Windows 7可以直接使用此软件。 –两种选单；Manual或Dynamic，图2.2。 6 PPC机种调整LED背光指导书...
- Page 7 方法二 –选Manual选单，即可从10%~100%进行调整，最后按Apply键做确认并设定完成，图2.3。 –选Dynamic选单，可先选Renew键来侦测目前主机周遭的光源，并依当下适合的光源设定所需求之最大值或最小值之光源 范围，并可调整Delay Time避免短暂的光源干扰导致背光值改变，调整完后按Apply键做确认并设定完成，图2.4、2.5。 PPC机种调整LED背光指导书 7...
- Page 8 方法二 –此软件为一开始进入操作系统时就会执行此程序，如果不需要此功能，请在选单左上角勾选“Do not execute this AP when startup”，图2.6、2.7。 8 PPC Series LED Bakclights Adjustment User Guide...
- Page 9 方法二 PPC机种调整LED背光指导书 9...
- Page 10 For technical support and service, please visit our support website at: http://www.advantech.com/support This manual is for the PPC Seires LED Backlight. Part No. 200K310030 1st Edition, Printed in China Oct. 2012 PPC Series LED Bakclights Adjustment User Guide 10...
- Page 11 – Select and enter the “Main” tab, refer to Figure 1.2. – Move to “Chipset” and select “Host Bridge” -> “Intel IGD Configuration” -> LCD Brightness Control, refer to Figure 1.3, Figure 1.4 and Figure 1.5. PPC Series LED Bakclights Adjustment User Guide 11...
- Page 12 Method 1 12 PPC Series LED Bakclights Adjustment User Guide...
- Page 13 Method 1 – Select “Manual Mode” to configure “Brightness Manual Control”. Options include “100%”, “80%”, “60%”, “40%”, “20%” and “10%”, see Figure 1.6 and Figure 1.7. PPC Series LED Bakclights Adjustment User Guide 13...
- Page 14 – If you choose “Dynamic Mode”, the system will launch auto-detect function, see Figure 1.6. – Press “OK” when “Save & Exit” dialogue appears to complete the configuration, refer to Figure 1.8. 14 PPC Series LED Bakclights Adjustment User Guide...
- Page 15 Net framework 2.0 first, then can use this software; you can directly use this software in Windows 7 OS. – There are two options: “Manual Mode” and “Dynamic Mode”, refer to Figure 2.2. PPC Series LED Bakclights Adjustment User Guide 15...
- Page 16 You can also set the value of “Delay time” to prevent the backlight value being changed by interference of shot-time lights. Click “Apply” to finish the configuration, refer to Figure 2.4 and Figure 2.5. 16 PPC Series LED Bakclights Adjustment User Guide...
- Page 17 – This software will execute when the system boots up. if you don’t need this function, please check the checkbox of “Do not execute this AP when startup”, see Figure 2.6 and 2.7. PPC Series LED Bakclights Adjustment User Guide 17...
- Page 18 Method 2 18 PPC Series LED Bakclights Adjustment User Guide...