Troubleshooting Guide - Unitron Quantum2 HP User Manual

Easy-DAI automatically selects your direct
audio input program when a DAI signal is
detected by your hearing aids. A short melody
will play to confirm that easy-DAI is activated.
When you disconnect the DAI input, your
hearing aids will return to the program you were
in prior to switching.
Ask your hearing healthcare professional for
information about the direct audio input system
and a connector cord.
40

Troubleshooting guide

Cause
No sound
Not turned on
Low/dead battery
Poor battery contact
Battery upside down
Earmolds/slim tubes/
domes blocked with
ear wax
Plugged microphone
shield
Possible remedy
Turn on
Replace battery
Consult your hearing
healthcare professional
Insert battery plus (+) side
up
Clean earmolds/ domes.
See "Cleaning your hearing
aids." Use cleaning pin to
dislodge ear wax in slim
tubes. Consult your hearing
healthcare professional
Consult your hearing
healthcare professional
41