Operating Instructions - Unitron Quantum2 HP User Manual

Operating instructions

Your hearing aids come with two controls that
allow you to further adjust them – a lever and a
push button.
Lever
The lever on your hearing aids can be
set up as either a volume control or a
SmartFocus 2 control.
Volume control
If the lever has been configured as a volume
control:
Press up to increase volume.
•
Press down to decrease volume.
•
As you change the volume level, your hearing
aids will beep.
Volume setting
Suggested volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
20
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
SmartFocus 2 (comfort-clarity control)
If the lever has been configured as a
SmartFocus 2 control:
Press up to increase clarity of speech.
•
Press down to decrease overall noise or
•
improve listening comfort.
Each step will change the hearing aid
performance. Sometimes multiple steps are
required to achieve the desired listening results.
After each press wait for about 4-5 seconds
to allow the hearing aid to adjust to the new
setting.
As you change the SmartFocus 2 level, your
hearing aids will beep.
21