Double Din Radio Provision - Metra Electronics 95-7953 Installation Instructions Manual

DOUBLE DIN RADIO PROVISION

*
Note: Refer also to the instructions included with the aftermarket radio.
NOTE: Mount the radio housing to the climate control assembly using the factory
screws removed in step 4 of dash disassembly.
1 Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure A)
2 Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly
using the screws supplied with the
radio. (Figure B)
3
Snap the Double DIN trim plate onto
the front of the housing/radio
assembly. (Figure B)
Continue to final assembly.
95-7953 KIT ASSEMBL Y
2
A
B