Double Din Radio/Stacked Iso Mount Unit Provision - Metra Electronics 95-2009 Installation Instructions Manual

1. Snap the Double DIN brackets to the edge of the Double DIN trim plate.
(Figure A)
2. Slide the Double DIN head unit or stacked ISO head units into the bracket/radio
housing assembly and secure the Double DIN head unit or stacked ISO head
units to the assembly using the screws supplied with the radio. (Figure B)
Note: For the Buick LeSabre, Oldsmobile Aurora, and the Pontiac Bonneville the
(3) speed clips and screws provided with the kit will need to be installed into
the sub dash where the screw holes line up on the kit.
(Figure A)
Kit Assembly 95-2009
Double DIN radio/Stacked ISO
mount unit provision
3. Locate the factory wiring harness in the dash. Metra recommends using the
4. Reassemble dash in reverse order of disassembly.
(Figure B)
25
proper mating adapter from Metra or AXXESS. Re-connect the negative battery
terminal and test the unit for proper operation.