Advertisement
INSTALLATION INSTRUCTIONS FOR PART 95-7504
Mazda 3 2004-2009
95-7504
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Bonus Display Replacement Pocket
KIT COMPONENTS
• A) Radio Housing • B) Double DIN Brackets • C) Double DIN Trim plate
•D) Display Replacement Pocket • E) Display Retention Brackets
• F) (2) 3/8" #10 Bolts and (2) #10 Nuts • G) (2) PC-7503 Panel Clips
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-7903 - Mazda harness 2001-up
Antenna Adapter:
• Not required
1-800-221-0932
© COPYRIGHT 2008-2009
APPLICATIONS
B
D
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
METRA ELECTRONICS CORPORATION
C
E
www.metraonline.com
F
G
Advertisement
Related Manuals for Metra Electronics 95-7504
Summary of Contents for Metra Electronics 95-7504
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7504 Mazda 3 2004-2009 95-7504 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision • Bonus Display Replacement Pocket KIT COMPONENTS • A) Radio Housing • B) Double DIN Brackets • C) Double DIN Trim plate •D) Display Replacement Pocket •...
-
Page 2: Table Of Contents
Final Assembly ......... 5,6 *Note: Refer also to the instructions included with the aftermarket radio. 95-7504 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. -
Page 3: Mazda 3 2004-2009
(Figure B) Remove (2) Phillips screws on back of display trim panel securing display trim then unclip and remove. (Figure C) Continue to display/pocket assembly. REAR VIEW - DISPLAY TRIM PANEL 95-7504 DASH DISASSEMBLY HOOK... -
Page 4: Display Brackets/Pocket Assembly
4 of Dash Disassembly secure the display replacement pocket to the back of the display trim panel. (Figure B) Continue to kit assembly. 95-7504 DISPLAY POCKET ASSEMBLY DISPLAY REPLACEMENT POCKET MOUNTED IN DISPLAY TRIM PANEL REAR VIEW - DISPLAY REPLACEMENT PANEL... -
Page 5: Double Din Radio Provision
Snap the trim plate onto the front of the radio housing. (Figure B) Attach the (2) PC-7503 panel clips to the rear of the radio housing. (Figure C) Continue to final assembly. 95-7504 KIT ASSEMBLY... -
Page 6: Stacked Iso Units Provision
Snap the trim plate onto the front of the radio housing. (Figure B) Attach the (2) PC-7503 panel clips to the rear of the radio housing. (Figure C) Continue to final assembly. 95-7504 KIT ASSEMBLY... -
Page 7: Final Assembly
Figure B. If the 99-7504 does not snap in correctly the result will be a noticeable gap on each side of the installation kit. (Figure C) 95-7504 FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together... - Page 8 All colors may not be present on all leads due to manufacturer’s specifications. 1-800-221-0932 REV. 05/29/09 © COPYRIGHT 2008-2009 METRA ELECTRONICS CORPORATION INST95-7504 Right Front (+) ... . Gray Right Front (-)... . . Gray/ Black Left Front (+) .