Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 95-7951
7951
95-
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
KIT COMPONENTS
A) Double DIN Trim Plate • B) Double DIN Brackets
A
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
APPLICATIONS
CHEVROLET
Aveo 2004-2006
Aveo Hatchback-2007
SUZUKI
Forenza 2004-2008
Reno 2005-2008
Verona 2004-2007
PONTIAC
G3 Hatchback-2007
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
Wiring Harness:
• 70-2105 - GM harness 2006-up
B
• 70-8405 - GM/Suzuki/Daewoo harness 1999-up
Antenna Adapter:
• 40-CR10 - Chryler antenna adapter 2002-up
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
www.metraonline.com
Advertisement
Table of Contents
Related Manuals for Metra Electronics 95-7951
Summary of Contents for Metra Electronics 95-7951
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7951 Aveo Hatchback-2007 7951 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision KIT COMPONENTS A) Double DIN Trim Plate • B) Double DIN Brackets Small Flat Blade Screwdriver/ Panel Removal Tool 1-800-221-0932 ©...
- Page 2 - Stacked ISO Mount Units Provision ......5 *Note: Refer also to the instructions included with the aftermarket radio. 95-7951 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
- Page 3 Unclip and remove the trim panels from both sides of radio/climate con- trols. (Figure A) Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure B) Continue to kit assembly. 95-7951 DASH DISASSEMBL Y...
- Page 4 (Figure D) Remove (4) 10 MM bolts securing radio. Unplug and remove radio. (Figure E) Continue to kit assembly. AM/FM TAPE TUNE 95-7951 DASH DISASSEMBL Y BASS MUTE SCAN Inside of Glove Box...
- Page 5 Disconnect the negative battery ter- minal to prevent an accidental short circuit. Unclip and remove the trim panel sur- rounding the radio. (Figure A) Remove (4) Phillips screws from radio. Unplug and remove radio. (Figure B) Continue to kit assembly. 95-7951 DASH DISASSEMBL Y...
- Page 6 (Figure E) Slide the Double DIN radio into the brack- et/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure F) Continue to final assembly. 95-7951 KIT ASSEMBL Y HERE ON BOTH SIDES...
- Page 7 (Figure E) Slide the stacked ISO units into the brack- et/trim plate assembly and secure the units to the assembly using the screws supplied with the units.e (Figure F) Continue to final assembly. 95-7951 KIT ASSEMBL Y HERE ON BOTH SIDES...
- Page 8 *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 1-800-221-0932 REV. 06/02/09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION 95-7951 FINAL ASSEMBL Y (A) Strip wire ends back 1/2"...
Need help?
Do you have a question about the 95-7951 and is the answer not in the manual?
Questions and answers