3. Push the purple locking mechanism up into the unlocked (
FIGURE 11-14
on a Netra ct 800 server, and
mechanism for the power supply unit on a Netra ct 400 server. The two LEDs on the
power supply unit should go OFF.
Power supply unit
captive screws (silver)
FIGURE 11-14
11-20
Netra ct Server Service Manual • February 2001
shows the location of the locking mechanism for the power supply unit
FIGURE 11-15
Removing or Replacing a Power Supply Unit From a Netra ct 800 Server
shows the location of the locking
Locking mechanism
) position.