Operating Multiple Cameras Using A Single Redmote - Red Epic Epic-X Operation Manual

16. Select "Disconnect" on the REDmote Upgrade Utility.
17. REDmote firmware upgrade is complete.

OPERATING MULTIPLE CAMERAS USING A SINGLE REDMOTE

To operate multiple cameras using a single REDmote, first the REDmote must be paired to multiple
cameras. Refer to OPERATION > WIRELESS CONNECTION for pairing instructions.
After pairing REDmote to the desired cameras, press Soft Menu Button 1 for CONNECT. Available
cameras will be listed to connect with wirelessly.
Select the camera you wish to control and press the ENTER button. When you want to switch to a
different camera, press Soft Menu Button 1 again to list available cameras and re-select. The above
image is shown for reference only. The MAC address will only display if two or more cameras have the
same name.
Version 2.0.5R1
201
DECEMBER 20, 2011 ©2011 RED.COM INC.