Recording - Red Epic Epic-X Operation Manual

RECORD RESOLUTION
To adjust Record Resolution, navigate the Cursor to the RESOLUTION icon in the Upper Status Row and
press the Navigation Group ENTER key. Adjust to the desired value using the Scroll Wheel and press
ENTER a second time to confirm.
If using a Touch Screen, press the RESOLUTION ICON, adjust RESOLUTION by sliding your finger left /
right, or tap on the desired resolution, and then press anywhere else on the touch screen to confirm.
The following Recording Resolutions are currently available:
•
5K
•
5K 2:1
•
5K WS
RECORD QUALITY (REDCODE)
To adjust Record Quality, navigate the Cursor to the QUALITY (RC) icon using the Navigation Group
Scroll Wheel, then press the ENTER key. Adjust to the desired value using the Scroll Wheel and then
press ENTER to confirm. Available REDCODE compression options are RC 3:1 through RC 18:1.
If using a Touch Screen, press the QUALITY icon, adjust the REDCODE value by sliding your finger left /
right or tap on the desired value, and then press anywhere else on the touch screen to confirm.
Default value for REDCODE is 8:1.
CAMERA ID (SLATE)
If operating on a multi-camera production, enter a different Camera ID for each camera; otherwise skip
this step; the camera is ready to shoot.
The Camera ID is set when the media is formatted. Refer to ADVANCED MENU > MEDIA for details.

4. RECORDING

Ensure a formatted REDMAG 1.8" SSD is inserted in the camera's Side SSD Module, then fully depress
any one of the RECORD buttons located on the Brain, Side SSD Module, Side Handle or REDmote.
48 48
•
5K ANA
•
4K
•
4K HD
©2011 RED.COM INC.
•
3K
•
2K
•
2K WS
Version 2.0.5R1
DECEMBER 20, 2011