Connecting / Removing - Red Epic Epic-X Operation Manual

CONNECTING / REMOVING

This section describes how to physically connect / remove the REDmote to / from an EPIC or EPIC Brain
or to / from the back on an expansion module. On the lower left and right sides of the REDmote are V-
lock release buttons (B, M) that must be depressed to release the REDmote from the camera or module.
PHYSICAL
CONNECTING (DOCKING)
1. Place the female V-Mount of the REDmote over the male V-Mount of the camera/module.
2. Press down until a click is heard which indicated the REDmote is securely attached.
3. The REDmote will confirm by displaying "DOCKED" momentarily (if REDmote is ON when docked).
NOTE: If the camera is ON and the REDmote is OFF, the REDmote will automatically power UP
when connected.
Version 2.0.5R1
177
DECEMBER 20, 2011 ©2011 RED.COM INC.