Multiple Cameras - Red Epic Epic-X Operation Manual

Once the updated fan has been installed and the camera is powered up, the message will
continue to appear. Press OK, then go to SECONDARY MENUS > SETTINGS > MAINTENANCE
> REDISCOVER and perform the rediscover procedure to clear the message.
NOTE: After the firmware upgrade, it is mandatory that you re-format the REDMAG SSDs before
use. Refer to APPENDIX B: MANAGING DIGITAL MEDIA > FORMATTING MEDIA.
NOTE: Once firmware is upgraded (on REDmote or camera), the REDmote must be paired to the
camera again.
IMPORTANT: Before formatting your media, be sure to copy any clips, presets or log files you
want to keep to your computer to prevent unwanted loss of your files. Refer to APPENDIX B:
MANAGING DIGITAL MEDIA > COPYING MEDIA.

MULTIPLE CAMERAS

If multiple cameras are to be upgraded, unmount the external media from the camera, and perform
STEPS 3 through 12 of the previous procedure for each camera.
Version 2.0.5R1
DECEMBER 20, 2011 ©2011 RED.COM INC.
145