APPENDIX C: CHARGING BATTERIES
REDVOLT
BATTERY LED ARRAY
The REDVOLT battery LED array consists of three (3) LED's and a button.
REDvolt LED Array
When button is pressed, LEDs will illuminate in relation to battery life available (in 33.3% steps). If single
LED blinks or no LEDs illuminate when pressed, battery requires charging.
BATTERY PERFORMANCE
When fully charged to 16.4V (+/- 0.2V), the REDVOLT battery is designed to provide approximately 30-
45 minutes of operational time when powering in the RED EPIC camera (this may vary depending on
installed accessories and loads).
DISCHARGE PROTECTION
The battery is equipped with discharge protection. When battery voltage reaches lower than 10V (+/-
0.12V) the battery stops supplying output voltage (discharging).
Version 2.0.5R1
151
DECEMBER 20, 2011
©2011 RED.COM INC.