Accessing Camera Controls / Settings - Red Epic Epic-X Operation Manual

greatly as there will be a slight power draw on the REDmote when shut down using this
procedure.

ACCESSING CAMERA CONTROLS / SETTINGS

The Navigation Group is used to navigate through the camera's menus. Refer to CAMERA
OPERATIONAL CONTROLS > REDMOTE > NAVIGATION GROUP. The camera settings and status are
displayed on the REDmote Color LED display. Refer to BASIC OPERATION > GRAPHICAL USER
INTERFACE AND NAVIGATION > REDMOTE.
The operations will be the same whether connected physically to the camera, or wirelessly.
CHANGING CAMERA SETTINGS
USING CAMERA LCD / EXTERNAL MONITOR AS REFERENCE
To adjust a parameter value displayed on the camera's Upper Status Group, first note the red colored
bar (located under 24fps in this example), indicating the currently active parameter for instant
adjustment.
Use the NAVIGATION GROUP directional pad to move the cursor to a different parameter if desired,
then press the ENTER key to select that parameter and use the Scroll Wheel to adjust that parameter's
value. To confirm the change in parameter value and to exit the adjustment menu, press the ENTER
button.
To access the camera's menus, press the MENU button at the lower left. The MENU displays on the
EVF, LCD or external monitors if the LCD and/or EVF are not connected disconnected.
Use the NAV GROUP to make changes to the cameras settings. Use the scroll wheel and directional
pad to move the cursor to navigate and make changes to the desired settings. When a desired setting
change is made, press the ENTER button or the directional pad UP arrow to exit from that setting.
Exiting Menus to Main Screen
To EXIT from the Secondary Menus and return to the main screen:
•
Press the MENU button until the main screen is displayed.
186 186
©2011 RED.COM INC.
Version 2.0.5R1
DECEMBER 20, 2011