Power Down - Red Epic Epic-X Operation Manual

If a formatted REDMAG 1.8" SSD is attached to the Brain, once powered up the Media Status LED will
illuminate Green. If this LED is not illuminated, verify a formatted REDMAG 1.8" SSD is inserted into the
Side SSD Module and / or format the SSD if it has not previously been formatted on the camera.
NOTE: Once powered up, if the Power Status LED illuminates Red, it indicates low remaining
battery capacity and a battery exchange or switch over to external DC power is recommended.

POWER DOWN

The camera can be powered down in two ways:
1. Using REDmote or Side Handle Menu controls, or via Touch Screen LCD icons. Refer to SECONDARY
MENUS > POWER.
2. Depress and continue to hold the Power / Record button in its fully depressed position for a minimum
of 5 seconds. When the button is released, INITIATING CAMERA SHUTDOWN will display and camera
will power down.
After Power Down, the Power Status LED will illuminate Red, if an appropriate power source is available.
Version 2.0.5R1
DECEMBER 20, 2011 ©2011 RED.COM INC.
33