RAW NOISE LEVEL BAR
The RAW noise level bar displays the amount of pixels in the image that are in noise. For example, if the
bar is about 1/8 of the total height, this would indicate approximately 1/8 of the total pixels in the image
are at an exposure level at risk of displaying noise when pushed at higher ISO or FLUT values in
postproduction.
RAW CLIP LEVEL BAR
The RAW clip level bar displays the amount of pixels in the image that are clipping. For example, if the bar
is about 1/4 of the total height, this would indicate approximately 1/8 of the total pixels in the image are at
an exposure level at risk of clipping and may not be recoverable by lowering ISO or FLUT values in
postproduction.
SIDE HANDLE
As you navigate and adjust settings on the camera (main menu settings only), they will be reflected on the
Side Handle LCD display.
The display elements include:
•
Power: Camera power status (DC Shown)
•
Frame Rate: Image capture rate
•
Resolution Recording Resolution
•
Quality: REDCODE setting
Version 2.0.5R1
DECEMBER 20, 2011
•
ISO Rating: Camera sensitivity
•
Shutter Speed: Exposure Time (or Degrees)
•
White Balance: Color Temp
©2011 RED.COM INC.
39