REEL NO.
When selected, a keypad will appear allowing you to enter a value between 1 and 999.
CAMERA ID (SLATE)
Identifies the camera with a letter A through Z. Default is A.
CAMERA POS (POSITION)
Identifies the camera position as Right, Left or Center. Default is Center.
FORMAT MEDIA
When selected, a new dialog box will appear allowing you to add properties to the media highlighted in
the Current Media box when formatting. Available options are REEL NO, CAM ID, CAM POS, and
FORMAT to format the media with the values entered.
NOTE: If clips are present on the media, you will be informed of how many clips will be erased
when you format the media.
Version 2.0.5R1
79
DECEMBER 20, 2011
©2011 RED.COM INC.