17. REDmote upgrade is complete. You can now reconnect to the camera.
NOTE: Pairing of the REDmote may not be necessary after upgrading the REDmote firmware,
however after upgrading the camera firmware, you must pair the REDmote again.
OPERATING MULTIPLE CAMERAS USING A SINGLE REDMOTE
To operate multiple cameras using a single REDmote, first the REDmote must be paired to multiple
cameras. Refer to OPERATION > WIRELESS CONNECTION for pairing instructions.
After pairing REDmote to the desired cameras, press Soft Menu Button 1 for CONNECT. Available
cameras will be listed to connect with wirelessly.
Select the camera you wish to control and press the ENTER button. When you want to switch to a
different camera, press Soft Menu Button 1 again to list available cameras and re-select.
Version 1.7.10
181
NOVEMBER 17, 2011
©2011 RED.COM INC.