14. After the first upgrade has been performed, the REDmote will reboot and "Updating Firmware" will
be displayed with a Green status bar showing upgrade progress.
15. The REDmote Software Wizard will disconnect from the REDmote.
16. REDmote upgrade is complete. REDmote will display "SEARCHING" once the upgrade has
completed.
OPERATING MULTIPLE CAMERAS USING A SINGLE REDMOTE
To operate multiple cameras using a single REDmote, first the REDmote must be paired to multiple
cameras. Refer to OPERATION > WIRELESS CONNECTION for pairing instructions.
After pairing REDmote to the desired cameras, press Soft Menu Button 1 for CONNECT. Available
cameras will be listed to connect with wirelessly.
Select the camera you wish to control and press the ENTER button. When you want to switch to a
different camera, press Soft Menu Button 1 again to list available cameras and re-select.
Version 1.6.46
NOVEMBER 17, 2011
©2011 RED.COM INC.
167