Panasonic KX-TDA50 Installation Manual page 43

Card
Type Max
MSG2 2
SVM2 2
ESVM2 4
Including one LCOT4 card that is installed by default.
*1
*2 Only one of the HLC4, DLC4, SLC4 or PLC4 card can be installed.
*3 A maximum of two DLC8, SLC8 and PLC8 cards can be installed.
CAUTION
•
To protect the main board from static electricity, do not touch parts on the main board or on the optional
service cards. To discharge static electricity, touch ground or wear a grounding strap.
•
When installing or removing the optional service cards, the power switch of the PBX must be in the off
position.
Note
•
For each card, the maximum number that can be installed in the PBX is listed in "1.2.1 Optional
Equipment".
•
Any card that exceeds the capacity of the PBX will be ignored.
•
When the PBX starts up with an invalid configuration, some cards will be ignored.
Installing Optional Service Cards
1.
Before installing the optional service cards, cut and remove the appropriate dummy cover plates from the
main unit.
CAUTION
For safety reasons, smooth the cut edges after removing the dummy cover plates.
Document Version 2010-11
02 03 04
4
Dummy Cover Plate
2.2.6 Installing/Removing the Optional Service Cards
Slot Number
05 06 07 08 09 10 11
ü ü ü ü
ü ü ü ü
ü ü ü ü
Installation Manual 43